Table of Contents
Advertisement
Application System
2)
Key function specification
3)
Mode setting
4)
Print control
R-52
Note:
• Set a "%GET" command, first, to use the number entered by the arrangement key later.
• When the "%GET" is programmed following constant number input, the constant
number is saved to the parameter save buffer.
• Numbers input using a "%PUT" command or by "([number])" are entered to the
number entry buffer in the same way as numbers input using the 10-key pad.
Any function key can be specified for an arrangement key function. :
[function code]:[record number] →
The numbers can be specified for zero suppression.
Note:
The arrangement key itself, cannot be programmed for in an arrangement program.
Any mode key can be specified for an arrangement key function. :
[function code]:[mode definition]→
Note:
121:01
: REG mode
121:02
: REF mode
121:03
: REG– mode
122:01
: X/Z mode:
122:02
: MGR mode:
122:03
: Collection/Consolidation mode:
122:04
: Auto-program mode:
122:05
: CF card:
123:01
: PGM1 mode:
123:02
: PGM2 mode:
123:03
: PGM3 mode:
123:04
: PGM4 mode:
123:05
: PGM5 mode:
123:06
: PGM6 mode:
There are two commands for controlling the printer:
PON
: Output printout data.
POFF
: Not output printout data.
Used for ordinary function keys
Used for mode keys
Advertisement
Table of Contents
