Manager Operation
3-3-20. Licence code entry
3-3-21. FTP client
R-110
This command is used to enter the software licence code.
↑
↓
You can execute FTP client processing by the operation below.
↑
↓
↓
1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.
3. Select "20. Licence code entry" and press the <YES> key.
4. Enter the licence code and press the <YES> key and select
"YES" and press the <YES> key.
1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.
3. Select "21. FTP Client" and press the <YES> key.
4. Select the appropriate FTP server in the list, and press
<YES>.