Table of Contents
Advertisement
Manager Operation
3-6-2-2. Z consolidation processing (except scanning PLU)
3-6-2-3. Z consolidation processing (scanning PLU)
NOTE:
R-126
Z consolidation processing is performed as the figure shown below.
1, 6
Satellite
Terminal
files
2
1 A Z consolidation command is started up from the master terminal.
The master first locks an objected terminal. (Z lock)
2 Data of the objected terminal files are sent to the master terminal, and are copied to the
consolidation work file.
3 The data in the consolidation work file is added to the consolidation file.
4 After the processing of the master terminal completes, the same processes described in
item 1 to 3 are executed for all other terminals.
5 The data accumulated in the consolidation file are reported on the master's printer.
6 After the above collection processing completes for all objected terminals, the files of
all objected terminals are cleared, and then satellite's Z lock statuses are released.
Z consolidation processing is performed as the figure shown below.
1, 5
Satellite
2, 3
Terminal
files
1 A Z consolidation command is started up from the master terminal.
The master first locks an objected terminal. (Z lock)
2 Data of the objected terminal files are sent to the master terminal, and are added to the
master terminal file.
3 Step 2 are executed for all other terminals.
4 The data accumulated in the master terminal file are reported on the master's printer.
6 After the above processing completes for all objected terminals, the files of all objected
terminals are cleared, and then satellite's Z lock statuses are released.
• Even if an error is occurred, or if the processing is terminated, the data to be collected
remains as they are, and Z lock statuses are automatically released. Therefore, retrying
the same operation can be performed.
Master
Terminal
files
2
Consolidation
work
3
Consolidation
files
Master
Terminal
files
5
4
Advertisement
Table of Contents
