Euro Change Over - Casio QT 6600 - 64 MB RAM Reference Manual

3-3-12. Euro change over

QT-6600 Reference Manual
After this operation, the following subjects are made:
(1) The Euro is defined as main currency and the local is defined as sub currency.
(2) All totals and counts are reset.
(3) Unit prices (department, subdepartment, PLU, 2nd @, shift PLU) are converted
in Euro.
Before "change over operation",
(1) Issue all reset report including open check report, if necessary.
(2) Sign off all cashier/clerk and stop all operations of all terminals of the system.
↑
↓
Perform the same operation of all the terminals of the system.
1. Sign on a clerk (if necessary).
2. Press <MODE> and <Manager> to assign manager mode.
3. Select "12. EURO Change over" and press the <YES> key.
4. If you want to proceed this step, press the <YES> key. To
abort this step, press the <NO> or <ESC> key.
5. If you want to proceed this step, enter "8888888888" and
press the <YES> key. (It takes a few minutes.)
To abort this step, press the <NO> or <ESC> key.
RECEIPT
R-103