Solution To Abnormality Of Master Terminal; Solution To Abnormality Of Satellite Terminal; Sign On Compulsory - Casio QT 6600 - 64 MB RAM Reference Manual

2-11-2. Solution to abnormality of master terminal

Receipt image

2-11-3. Solution to abnormality of satellite terminal

2-11-4. Sign on compulsory

Note:
QT-6600 Reference Manual
When the satellite terminals cannot receive any information from the master terminal, the
master terminal shows the error message on the window and prints out the receipt with
terminal IDs that failed to communicate the data.
• The error message and receipt will appear whenever the sign-on is failed. If you cannot
solve the inline data communication problem, program the system connection again,
and remove the uncommunicative terminal.
• When the satellite terminal cannot receive any information from the master terminal,
the default CLOCK-IN/OUT information remain.
In this case, only manager can sign on.
• When the satellite terminal could receive the CLOCK-IN/OUT information from the
master terminal only once, but failed to receive after then, the CLOCK-IN/OUT
information in each satellite terminal has left in the last received condition. In such case,
the last received information control employees' sign on/off. (Manager can always sign
on.)
When the satellite terminal cannot receive the information in spite of normal CLOCK-IN
operation on the master terminal, an employee may not sign on for some reason.
In such case, the manager needs the following operation.
1. Sign on by the manager (normal sign on operation.)
2. 99 xxxx <CLK#> (xxxx: the secret code of the corresponding employee, 4-digit.)
3. Sign off by the manager and the corresponding employee can sign on.
When the error message appeared under the employee's CLOCK-IN operation, manager
should operate above steps.
— Header
— Fixed message
— Machine ID, Error code
— Machine ID, Error code
R-69