Programming Customer Control; Programming Customer Group - Casio QT-6600 Programming Manual

4-1-25 Programming customer control

Operation: <PGM3> → 1.Machine Feature → 25.Customer Control
Note: Magnetic card data format

4-1-26 Programming customer group

Operation: <PGM3> → 1.Machine Feature → 26.Customer Group
→ Select customer group
QT-6600 Programming Manual
You can program the parameters to control customer.
Account code
(13 - 16 characters)
Customer No.
Offset value
No. of digits
Offset value
You can program the parameters to control customer group.
——— Allow to create new customer in REG mode.
——— Create customer No. automatically
——— Confirm to clear customer data at finalization.
——— Start value of the auto customer No. range (0 ~ 9999)
——— End value of the auto customer No. range (0 ~ 9999)
——— Force to enter the name of the customer while creation.
——— Force to enter the address of the customer while creation.
——— Force to enter the phone-# of the customer while creation.
——— The No. of the digit of the customer in customer card.
(0 ~ 12)
——— The offset value of the customer No. in customer card.
(0 ~ 16)
——— Site ID No. (0000 ~ 9999)
——— The offset value of the site ID in customer card (0 ~ 9)
•••
Site ID
4-digits
——— Group name (0 ~ 16)
——— Discount / Not used
——— (0 ~ 99999999; "0" is treated as no limitation.)
——— Print customer name on receipt.
——— Print customer address on receipt.
——— Print customer phone No. on receipt.
——— Print customer name on order.
——— Print customer address on order.
——— Print customer phone No. on order.
——— Discount 1 descriptor (0 ~ 16)
——— Discount 1 percent rate (0.00 ~ 99.99)
——— Tax status (see discount key program)
——— Discount 2 descriptor (0 ~ 16)
——— Discount 2 percent rate (0.00 ~ 99.99)
——— Discount 3 descriptor (0 ~ 16)
——— Discount 3 percent rate (0.00 ~ 99.99)
P-69