T
Floppy Disk Controller
This field enables the diskette drive interface connector
on the riser board. Choices include "Enabled" (the
default) or "Disabled."
T
IDE Controller
The IDE Controller field enables the IDE interface
connectors on the riser board. Choices include "Both"
(default), "Primary," "Secondary," and "Disabled."
T
Audio
This field ("Enabled" by default) enables the audio
system on the system board. Choose "Disabled" if an
external audio board is installed.
T
Legacy USB Support
This field ("Disabled" by default) enables support for
legacy Universal Serial Bus (USB) devices.
T
Hardware Monitor
This field ("Enabled by default) enables the hardware
monitor device.
Keyboard Configuration
Use this field to adjust the following keyboard features:
T
Num Lock
This field controls whether the Num Lock key on the
keyboard is "On" or "Off" at bootup. The default setting
for this field is "Auto."
T
Key Click
This field turns audible key click on or off. The default
is "Disabled."
Using Tools and Utilities 4-15