Be sure to either reattach the heatsink used with the
old processor or install the heatsink supplied with
the new processor.
Replace the heatsink by positioning the clamp opening
4.
over the front and back socket tabs.
Check to see if the newly installed processor requires a
5.
system board jumper change (see Chapter 6, Setting
System Board Jumpers).
Replace the system unit cover (see "Replacing the
6.
Desktop Cover" or Replacing the Minitower Cover").
DATA STORAGE DEVICES
The system board in the computer supports the following
storage devices:
T
up to two diskette drives, including the standard
1.44-MB diskette drive
T
up to four IDE devices such as IDE hard disks, an IDE
CD-ROM reader, and an IDE Zip drive.
Other storage devices might require the installation of a
compatible controller board. See your hardware dealer
about the storage devices available for your system.
5-38 Installing Options
!
CAUTION