Table of Contents
Advertisement
Using PC Cards
Follow these steps to insert a PC card into the PC host.
Holding the PC card at its top edge, insert it, label side
1.
up, into the PC card slot.
Insert the PC card all the way into the drive.
2.
Wait for a beep after inserting the card.
3.
To remove a PC card from the PC card host, press the
release button next to the PC card slot.
Using a Tape Backup Unit
To insert a tape cartridge into the tape backup unit, follow
these steps.
Hold the cartridge with the metal base plate down and
1.
the tape access door facing the drive slot.
Wait until the green drive activity lamp goes off.
2.
Push the cartridge into the drive slot through the flip-up
3.
door. Once the cartridge is fully inserted, the drive's
locking mechanism holds it in place.
To remove a tape cartridge from the tape backup unit, wait
until the green drive activity lamp goes off, and then pull the
cartridge out of the drive slot.
Using a Zip Drive
Follow these steps to insert a Zip disk in the Zip drive.
Holding the disk at its top edge, insert it, label side up,
1.
into the Zip drive.
Insert the disk all the way into the drive until you hear a
2.
click.
Using Your Computer 2-15
Advertisement
Table of Contents
