You can obtain the BIOS Recovery program by
downloading it to a diskette from the NECCSD Bulletin
Board System (BBS) or the NECCSD File Transfer
Protocol (FTP) site. See "NECCSD Bulletin Board
System" in Chapter 7 for information on how to
download files onto a diskette. See "Internet" in
Chapter 7 to access the NECCSD FTP site.
Jumpers are set correctly at the factory for your
configuration.
If your system requires a jumper change, change
only the setting for that condition. Otherwise, keep
the jumpers at their factory settings.
Changing Processor Jumper Settings
The following procedure explains how to locate and change
the jumper setting when you upgrade your processor:
The system power must be off before changing a
jumper setting.
Power off and unplug the system and any peripherals.
1.
Remove the system unit cover (see "Removing the
2.
System Unit Cover" in Chapter 5).
Remove the system board (see "Removing the System
3.
Board" in Chapter 5).
6-2 Setting Jumpers
!
CAUTION
!
WARNING