Table of Contents
Advertisement
T
On Modem Ring
This field enables an external modem to work even when
your system is in a power reduction state. Choosing
"Power On" (the default) restores the system to full
power so it can receive a modem ring. Other choices
include "Stay Off" if you do not want full power
restored on a modem ring, and "Last State."
T
On LAN
This field enables your system to be contacted via a
LAN even when your system is in a power reduction
state. Choosing "Power On" (default) restores the
system to full power so the LAN connection can be
made. Other choices include "Stay Off" if you do not
want full power restored, and "Last State." (Wake on
LAN does not work if the Restore On AC/Power Loss
field is set to "Stay Off.")
T
On PME
This field controls how the system responds to a PCI
Power Management Enable (PME) wake up event. The
choices are "Power On" (the default), "Last State," and
"Stay Off."
T
Boot Order
These fields allow you to set the order in which your
system's drives boot up. The default order is:
First Boot Device: ATAPI CD-ROM Drive
Second Boot Device: Removable Devices
Third Boot Device: Hard Disk
Fourth Boot Device: Network Boot.
Using Tools and Utilities 4-23
Advertisement
Table of Contents
