MINITOWER CHASSIS FLOOR REMOVAL AND
REPLACEMENT
The following sections describe how to remove and replace
the minitower chassis floor.
Removing the Minitower Chassis Floor
Before removing the system board, or upgrading an
expansion board, you must remove the chassis floor in
minitower models.
Remove the chassis floor as follows.
NOTE
before removing the minitower chassis floor. See
"Removing the Minitower Cover."
1.
Remove the minitower cover (see "Removing the
Minitower Cover").
2.
Place the system unit on its right side.
Loosen the thumbscrew holding the floor to the edge of
3.
the chassis.
Remove the stand and the system unit cover
Installing Options 5-15