Table of Contents
Advertisement
If you are installing a CD-ROM reader and your system
4.
contains audio components on the system board or audio
card, also connect the audio cable (see the instructions
that come with the reader).
Internal SCSI Device Cabling
The following procedure explains how to cable an internal
SCSI device.
NOTE
from the one shown.
Remove the termination from the appropriate connector
1.
on the SCSI device.
Connect the appropriate connector on the SCSI device
2.
cable to the SCSI cable connector on the SCSI device.
5-52 Installing Options
Connecting IDE device cables
The appearance of your device may vary
Advertisement
Table of Contents
