Honeywell BENDIX/KING KAP 140 Maintenance Manual page 72

The data is received by the FCC and stored in the configuration module. During upload, the FCC
verifies the file type is correct and that data transfers without corruption. If the upload was
unsuccessful, one of the following messages is displayed and it may be necessary to press the
'ESC' key to return to the Installation Menu screen.
The FCC also compares the strap code stored in the certification file with the harness strap code.
If they don't match, the following message will be displayed.
If the file transfer is successful and the strap codes match, the following message will be displayed.
Installation data have been saved in non-volatile memory
Revision 2, Dec/2002
CS:15574F02
BENDIX/KING
KAP 140
Upload installation file failed: CHECKSUM ERROR
Upload installation file failed: MEMORY OVERRUN
Invalid strap code, installation aborted
Page 3--28