Honeywell BENDIX/KING KAP 140 Maintenance Manual page 68

3.3.11 ERROR LOG SCREEN
Pressing 'L' when the Main Menu screen is displayed will cause the Error Log Menu screen, shown
in Figure 3--12, to be displayed.
Pressing 'D' when the Error Log Menu screen is displayed will cause the Error Log Data screen,
similar to Figure 3--13, to be displayed. The top of this screen indicates the total number of errors
stored in non-volatile memory (available for display), the current power cycle number and the
amount of elapsed time since the beginning of the current power cycle (at the time the Error Log
Data screen was entered) in hours:minutes:seconds format. The power cycle number is
incremented each time power is cycled to the unit.
The error log data table displayed on this screen contains one line (row) of information for each
error stored. The most recent error stored in the error log is the last error in the table (has the
highest sequence number). The first column ("#") contains the error sequence number. The
second column ("Power cycle") contains the power cycle number in which the error occurred and
was recorded. The
hours:minutes:seconds format) since the beginning of the power cycle in which the error was
recorded until the time the error occurred. The fourth column ("Error") contains the error number.
The fifth column ("Description") contains a brief description of the error. For more details on a
particular error logged, see Appendix A, Error Codes.
A maximum of seventeen (17) errors can be displayed on this screen at any one time. The error
log table may be scrolled one line (row) at a time with the up or down arrow keys, or a page at a
time with the right or left arrow keys.
Revision 2, Dec/2002
CS:15574F02
BENDIX/KING
KAP 140
System mode: Normal
Error Log
---------
D - Display Error Log
F - Dump Error Log for file capture
C - Clear Error Log
R - Reset Error Log
Press CR to exit :
FIGURE 3--12 ERROR LOG MENU SCREEN
third column ("Delta Time") contains the elapsed time (in
Page 3--24