Honeywell BENDIX/KING KAP 140 Maintenance Manual page 61

ITEM
Roll Rate
Roll Steering
Heading Datum
Course Datum
NAV dev
GS dev
Trim sense
Temperature
Revision 2, Dec/2002
CS:15574F02
BENDIX/KING
KAP 140
DESCRIPTION
Combined roll rate and yaw rate output signal
supplied from the turn coordinator with a scale factor
of 333 mV per deg/sec. Input range is ± 7.5 deg/s.
Displayed resolution is 0.014 deg/s per bit. Validity
based on Rate Valid input.
Roll steering signal is supplied from the KLN 94 with
a scale factor of 2 volts per deg/sec. Input range is
+ 6 deg/sec. Displayed resultion is 0.012 deg/sec
per bit. Validity based on Roll Steering valid.
Heading datum signal supplied from a horizontal
situation indicator with a scale factor of 550 mV per
degree. Input range is ± 25 degrees. Displayed
resolution is 0.089 degrees per bit. Validity based on
DG Valid input.
Course datum signal supplied from a directional gyro
or horizontal situation indicator with a scale factor of
210 mV per degree. Input range is ± 60 degrees.
Displayed resolution is 0.116 degrees per bit.
Validity based on DG Valid input.
Navigation deviation signal supplied from the
VOR/ILS or GPS receiver with a scale factor of 15mV
per degree VOR (equivalent to 10% of Full Scale
deflection). Input range is ± 16.7 degrees.
Resolution of display value is 0.033 degrees per bit.
Validity based on NAV Valid input.
Glideslope deviation signal supplied from the
VOR/ILS receiver with a scale factor of 214mV per
degree. Input range is ± 1.17 degrees. Resolution
of display value is 0.0023 degrees per bit. Validity
based on GS Valid input.
Torque output supplied from KS270C Pitch servo
with a scale factor of 100mVper in--lb. Input range is
± 31 in--lb where positive implies CW torque.
Resolution of display value is 0.061 in--lb per bit.
Validity based on internal Analog Valid.
Temperature sensor internal to the FCC. Input range
is --273 ° C to + 227 ° C. Displayed resolution is 0.49
° C per bit. Validity based on Analog Valid.
Page 3--17