Honeywell BENDIX/KING KAP 140 Maintenance Manual page 71

3.4 INSTALLATION SETUP
3.4.1 INSTALLATION SETUP SCREEN
Pressing '1' followed by 'ENTER' when the Installation Menu screen is displayed will prompt the
user to upload an installation file (i.e. *.CER file), as shown in Figure 3--16. Pressing the 'ESC'
key at this point will return the user to the Installation Menu screen.
Upload installation file or press <ESC> to abort
File transfer is accomplished by configuring the terminal emulator program used for the RTI to send
a text file. The certification file for a particular aircraft is selected from the certification diskette.
The certification diskette contains the files associated with each
aircraft certification. These files define certain parameters that are
specific to the aircraft. For each aircraft there are three separate
files with the following extensions: .CER, .DAT, and .TXT. The .CER
file contains the actual data that is uploaded to the configuration
module and used by the FCC. The .DAT file lists the data that is
uploaded to the configuration module in a human readable format.
The .TXT file describes which aircraft the data pertains to and the
expected aircraft harness strap code.
Revision 2, Dec/2002
CS:15574F02
BENDIX/KING
KAP 140
System mode: Normal
Installation Setup
------------------
FIGURE 3--16 INSTALLATION SETUP SCREEN
NOTE
Page 3--27