Build A Network In Fdm Client - Honeywell SmartLine SLN700 User Manual

Build a Network in FDM Client

After configuring the network in FDM Server Management Tool, user must establish the
connection with a network and detect the devices connected to the network. This process is known
as building a network.
Follow below procedure to build a network in FDM Client:
1. On the FDM Client homepage, under the Network View, right-click available
network.
2. Select Build Network from the list as shown below.
Page 6
Figure 4: Building a Network in FDM

SLN700 Series HART Option User's Manual Revision 1