Table of Contents
Advertisement
EMC Compliance
EMC Compliance
B
B-4
The PrPMC750 is an add-on module meant to be used in conjunction with
standard VME or CompactPCI baseboard applications. As such, it is the
responsibility of the OEM to meet the regulatory guidelines as determined
by their application.
The PrPMC750 has been tested in conjunction with a standard MCG
baseboard and chassis for CE certification and meets the requirements for
EN55022 Class A equipment. Compliance was achieved under the
following conditions:
Shielded cables on all external I/O ports.
Cable shields connected to earth ground via metal shell connectors
bonded to a conductive module front panel.
Conductive chassis rails connected to earth ground. This provides
the path for connecting shields to earth ground.
Front panel screws properly tightened.
For minimum RF emissions, it is essential that the conditions above be
implemented. Failure to do so could compromise the EMC compliance of
the equipment containing the module.
Computer Group Literature Center Web Site
Advertisement
Table of Contents
