Diagnostic Tests - Motorola PRPMC750 Installation And Use Manual

PPCBug
5
!
Caution

Diagnostic Tests

5-10
Table 5-1. Debugger Commands (Continued)
Command Description
SET Set Time and Date
SROM SROM Examine/Modify
SYM Symbol Table Attach
NOSYM Symbol Table Detach
SYMS Symbol Table Display/Search
T Trace
TA Terminal Attach
TIME Display Time and Date
TM Transparent Mode
TT Trace to Temporary Breakpoint
VE Verify S-Records Against Memory
VER Revision/Version Display
WL Write Loop
Although a command to allow the erasing and reprogramming
of Flash memory is available to you, keep in mind that
reprogramming any portion of Flash memory will erase
everything currently contained in Flash, including the
PPCBug debugger.
Note
NVRAM is located in Flash Bank A on the PrPMC750
board.
The PPCBug hardware diagnostics are intended for testing and
troubleshooting the PrPMC750 module.
Computer Group Literature Center Web Site