Table 5-2. Diagnostic Test Groups - Motorola PRPMC750 Installation And Use Manual

In order to use the diagnostics, you must switch to the diagnostic directory.
You may switch between directories by using the SD (Switch Directories)
command. You may view a list of the commands in the directory that you
are currently in by using the HE (Help) command.
If you are in the debugger directory, the debugger prompt
displays, and all of the debugger commands are available. Diagnostics
commands cannot be entered at the
If you are in the diagnostic directory, the diagnostic prompt
displays, and all of the debugger and diagnostic commands are available.
PPCBug's diagnostic test groups are listed in the
all tests are performed on the PrPMC750. Using the HE command, you
can list the diagnostic routines available in each test group. Refer to the
PPC1Bug Diagnostics Manual for complete descriptions of the diagnostic
routines and instructions on how to invoke them.
Test Group
CL1283*
DEC**
HAWK
ISABRDGE**
KBD8730x*
L2CACHE
NCR**
PAR8730x*
UART
PCIBUS
RAM
RTC*
http://www.motorola.com/computer/literature

Table 5-2. Diagnostic Test Groups

Description
Parallel Interface (CL1283) Tests*
DEC21x43 Ethernet Controller Tests
HAWK Tests
PCI/ISA Bridge Tests
PC8730x Keyboard/Mouse Tests*
Level 2 Cache Tests
NCR 53C8xx SCSI-2 I/O Processor Tests
Parallel Interface (PC8730x) Test*
Serial Input/Output Tests
PCI/PMC Generic Tests
Local RAM Tests
MK48Txx Timekeeping Tests
prompt.
<PPC6-Bug>
Table 5-2. Note that not
Using PPCBug
<PPC6-Bug>
<PPC6-Diag>
5-11
5