Figure 1-3. Installing Sdram Mezzanine On Prpmc750 - Motorola PRPMC750 Installation And Use Manual

Preparation and Installation
1

Figure 1-3. Installing SDRAM Mezzanine on PrPMC750

!
Caution
1-12
3. Carefully remove the VME or CompactPCI board, with the
PrPMC750 installed, from its card slot and place it on a clean and
adequately protected working surface (preferably an ESD mat),
component side up, with the front panel facing you. Note that the
ESD mat should be on a firm surface which does not bow.
Avoid touching areas of integrated circuitry; static discharge
can damage these circuits
Computer Group Literature Center Web Site