Table of Contents
Advertisement
Unpacking the PrPMC750 Hardware
Note
Unpack the equipment from the shipping carton(s). Refer to the packing
list(s) and verify that all items are present. Save the packing material for
storing and reshipping of equipment.
Avoid touching areas of integrated circuitry; static discharge
!
can damage these circuits.
Caution
Preparing the PrPMC750 Hardware
To produce the desired configuration and ensure proper operation of the
PrPMC750, you may need to carry out certain modifications before and
after installing the modules.
The following paragraphs discuss the preparation of the PrPMC750
hardware components prior to installing them into a chassis and
connecting them.
PrPMC750 Configuration
The PrPMC750 provides software control over most options. By setting
bits in control registers after installing the PrPMC750 in a system, you can
modify its configuration. The PrPMC750 control registers are described in
the PRPMC750 Processor PMC Module Programmer's Reference Guide
as listed in
Appendix A,
http://www.motorola.com/computer/literature
If the shipping carton(s) is/are damaged upon receipt, request
that the carrier's agent be present during the unpacking and
inspection of the equipment.
Table
A-1,
Motorola Computer Group
Related Documentation on page
Unpacking the PrPMC750 Hardware
Documents, in
A-1.
1
1-5
Advertisement
Table of Contents
