Epson GX Series Manual page 380

Industrial robot:
Table of Contents

Advertisement

Industrial Robot: SCARA Robots GX series Manual
POINTS
When applying grease, be careful to cover the hand and peripheral equipment so that, if any grease falls on
them, it will not affect their performance.
1. Turn on the Controller.
2. Lower the shaft to the lower limit in one of the following ways.
Symbol
a
Joint #3 and Joint #4 brake release switch
b
Arm #2
c
Shaft
d
Arm #1
While pressing down the brake release switch, manually lower the shaft to the lower limit.
POINTS
When pressing the brake release switch, watch for the shaft descending or rotating under the weight of
the hand.
Using the EPSON RC+ [Tools] - [Robot Manager] - [Jog & Teach] panel, lower the shaft to the lower limit.
POINTS
Make sure that the hand does not interfere with peripheral equipment or other objects.
Description
Rev.7
380

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gx4-a251cGx4-a301cGx4-a351cGx4-b251cGx4-b301cGx4-b351c

Table of Contents