Standard Horizon QUANTUM AIS GX6000E Owner's Manual page 90

4. Rotate the DIAL/ENT knob to select "POSITION:",
then press the [SELECT] soft key.
5. Rotate the DIAL/ENT knob to select the first number
of latitude, then press the [SELECT] soft key to step
to the next number.
6. Repeat step 5 to set the position.
If a mistake was made, rotate the DIAL/ENT knob to
select "←" or "→", press the [SELECT] soft key until
the wrong character is selected, then perform step 5.
7. When finished programming the position, press the [FINISH] soft key. The
display will return to the previous screen.
8. Rotate the DIAL/ENT knob to select "SAVE &
GOTO", then press the [SELECT] soft key. To set the
Waypoint as a temporary destination without saving
and start the navigation, select "GOTO" and press the
[SELECT] soft key.
The navigation screen will appear.
The screen includes the distance and direction to the
destination, and the waypoint is indicated by a dot ()
inside the compass.
9. Press one of the soft keys to show the key selections.
Press the [STOP] soft key to stop the navigation.
11.1.2 Setting Up Waypoint Directory
Marking a Position
This feature allows the radio to mark the current position of the vessel.
[ ]  "SETUP"  "WAYPOINT SETUP"  "MARK POSITION"
1.
2. Rotate the DIAL/ENT knob to select "NAME:", then
press the [SELECT] soft key.
3. Enter the waypoint name by rotating the DIAL/ENT
knob and the [SELECT] soft key.
When finished entering the name (using fifteen char-
acters or less), press the [FINISH] soft key.
Page 88 GX6000E