Standard Horizon QUANTUM AIS GX6000E Owner's Manual page 79

3. The display indicates the distance and direction of
the received vessel, and the compass displays the
received vessel with a dot ().
Stopping Navigation to the Reported Position
1. Press one of the soft keys to show the key selections.
2. Press the [STOP] soft key. The radio will stop navigat-
ing to the waypoint and the normal VHF display will
be shown.
10.7.4 Saving the Reported Position as a Waypoint
The GX6000E can save a position report call in the radio's memory as a
waypoint.
1. After the position report call has been received, press
the [SAVE] soft key.
2. If you want to change the name of the waypoint, rotate
the DIAL/ENT knob to select "NAME", then press the
[SELECT] soft key.
3. Enter the name of the waypoint you want to reference
in the directory. For details, refer to "10.4.1 Setting
up the Individual / Position Call Directory".
4. Rotate the DIAL/ENT knob to select "SAVE", then
press the [SELECT] soft key to save the waypoint
into memory.
5. Press the [OK] soft key to return to the position report
display.
GX6000E Page 77