Standard Horizon QUANTUM AIS GX6000E Owner's Manual page 100

The GM group being monitored changes. The GM
target display appears.
5. Press the CLEAR key to return to radio operation.
12.2.2 Transmitting a DSC Call to a Group Member
1. On the GM target display, press one of the soft keys
to show the key selections.
2. Press the [TG LIST] soft key.
3. Rotate the DIAL/ENT knob to select a member you
want to call.
4. Press the [SELECT] soft key to display the location,
distance, and bearing of the selected member.
5. Press the [CALL] soft key to transmit a DSC Individual
call to the selected member.
12.2.3 Starting Navigation to a Group Member
1. On the GM target display, press one of the soft keys
to show the key selections.
2. Press the [TG LIST] soft key.
3. Rotate the DIAL/ENT knob to select a member you
want to approach.
4. Press the [SELECT] soft key to display the location,
distance, and bearing of the selected member.
5. Press the [TO WPT] soft key to start navigation to the
selected member. (Press the [BACK] soft key twice
to cancel and return to the GM target display.)
Page 98 GX6000E