Standard Horizon QUANTUM AIS GX6000E Owner's Manual page 103

3. Rotate the DIAL/ENT knob to select the MMSI number
(or vessel name). then press the [SELECT] soft key.
Pressing the [DANGER] soft key changes the order
to the TCPA time order.
4. The AIS target information screen appears. To see
more information of the AIS target, press the [NEXT]
soft key.
5. Press the CLEAR key to return to radio operation.
13.2.2 Changing the AIS Range
1. On the AIS screen, press one of the soft keys to show
the key selections.
2. Press the [RANGE] soft key. Press the soft keys at
the center and right side to select the radius range to
display on the AIS screen.
3. Press the [BACK] soft key to return to AIS screen.
You may change the display range unit of the AIS screen, refer to
section "18.7 UNITS OF MEASURE".
13.2.3 Transmitting an Individual Call to an AIS Ship
It is possible for the GX6000E to transmit a DSC individual call to a received
AIS target by the procedure below:
1. On the AIS screen, press one of the soft keys to show
the key selections.
2. Press the [TG LIST] soft key to show a list of AIS
target being received.
3. Rotate the DIAL/ENT knob to select the MMSI number
(or vessel name). then press the [SELECT] soft key.
GX6000E
NOTE
Page 101