Table of Contents
Advertisement
3. Press the [ENTER] soft key to store the selected setting.
4. Press the CLEAR key to return to radio operation.
10.6.2
Transmitting a Position Request to Another Vessel
Position Request using the Individual/Position Directory
Refer to section "10.4 INDIVIDUAL CALL" to enter information into the indi-
vidual directory.
[
] "DSC CALL" "POS REQUEST CALL"
1.
2. Rotate the DIAL/ENT knob to select "HISTORY" or
"MEMORY", then press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select a name that was
stored in the individual/position directory.
4. Press the [SELECT] soft key, then press the [YES]
soft key to transmit the position request DSC call.
5. When the GX6000E receives the position from the
polled vessel it is shown on the radio display.
6. Press the [QUIT] soft key to return to radio operation.
If the GX6000E does not receive position data from the polled vessel,
the display will show "NO POSITION DATA".
Position Request by Manually Entering an MMSI
This feature allows you to request the position of a vessel by manually enter-
ing the MMSI.
[
] "DSC CALL" "POS REQUEST CALL"
1.
GX6000E
NOTE
Page 71
Advertisement
Table of Contents
