Standard Horizon QUANTUM AIS GX6000E Owner's Manual page 106

[ ]  "SETUP"  "AIS SETUP"  "TCPA"
1.
2. Rotate the DIAL/ENT knob to select the time you want
the radio to alert you of an approaching AIS equipped
vessel. The time can be set from "1min" to "30min"
("10min" is default).
3. Press the [ENTER] soft key to store the selected
setting.
4. Press the CLEAR key to return to radio operation.
13.3.3 CPA/TCPA Alarm
Enable/disable the CPA/TCPA alarm functions. The default setting is "OFF".
[ ]  "SETUP"  "AIS SETUP"  "CPA/TCPA ALARM"
1.
2. Rotate the DIAL/ENT knob to select "CPA" or "TCPA",
then press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "OFF" or "ON".
4. Press the [ENTER] soft key to store the selected
setting.
5. Press the CLEAR key to return to radio operation.
The alarm will sound until it is disabled (1) by pressing any key, (2)
following the steps above and selecting "OFF" in step 3, or (3) when
the ship is out of the selected CPA/TCPA alarm range. The alarm is
produced from the front panel speaker, the speaker in the mic, the
optional external speaker and optional RAM4 and RAM4W mic when
connected.
13.3.4 IGNORE VESSELS
This function allows listed registered AIS vessels to be ignored by the CPA /
TCPA alarm function.
[ ]  "SETUP"  "AIS SETUP"  "CPA/TCPA ALARM"
1.
Page 104
NOTE
GX6000E