Standard Horizon QUANTUM AIS GX6000E Owner's Manual page 81

4. Press the [YES] soft key to transmit the polling call.
5. After a polling call is transmitted, if the reply signal
is not received, "Waiting for ACK" is shown on the
display which means the GX6000E is waiting for the
vessel you called to send an acknowledgement.
6. To transmit the call again, press the [RESEND] soft
key.
7. Press the [QUIT] soft key to return to radio operation.
Polling Call by Manually Entering an MMSI
This feature allows you to contact a vessel by manually entering the MMSI of
the ship you want to track.
[ ]  "DSC CALL"  "POLLING CALL"
1.
2. Rotate the DIAL/ENT knob to select "MANUAL", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select the first number
in the MMSI and press the [SELECT] soft key.
4. Repeat step 3 until all the digits of the MMSI are shown
on the display.
5. If a mistake was made entering in the MMSI number,
rotate the DIAL/ENT knob to select "←" or "→", press
the [SELECT] soft key until the wrong character is
selected, then perform step 3.
6. When finished entering the MMSI number, press the [FINISH] soft key.
7. Press the [YES] soft key to transmit the polling call.
8. Press the [QUIT] soft key to return to radio operation.
GX6000E Page 79