Standard Horizon QUANTUM AIS GX6000E Owner's Manual page 78

8. Press the [QUIT] soft key to return to radio operation.
10.7.2 Receiving a DSC Position Report Call
When another vessel transmits their vessels location to the GX6000E the
following will happen:
1. When a position report call is received from another
vessel, a ringing sound will be produced.
2. Press any key to stop ringing.
3. Press the [INFO] soft key to see more detailed posi-
tion information of the station.
4. To exit to radio mode, press the [QUIT] soft key.
10.7.3 Navigating to the Reported Position
The GX6000E has a feature that allows you to navigate to a received position
report call by using the compass display. Navigating to the position of a position
report call may be enabled by the procedure below.
1. After the position report call has been received, press
the [INFO] soft key.
2. Press the [WPT] soft key.
Page 76 GX6000E