Gps Configuration - Standard Horizon QUANTUM AIS GX6000E Owner's Manual

7.8

GPS CONFIGURATION

7.8.1 Changing the GPS Time
The GX6000E shows GPS satellite time or UTC (Universal Time Coordinated)
time in factory default. A time offset is needed to show the local time in your
area. The time offset must be changed in order for the radio to display the
current time in your area.
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "SETUP", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "GPS SETUP",
then press the [SELECT] soft key.
4. Rotate the DIAL/ENT knob to select "TIME OFFSET",
then press the [SELECT] soft key.
5. Rotate the DIAL/ENT knob to select time offset of
your location. If "00:00" is assigned, the time is the
same as UTC or GPS satellite time.
6. Press the [ENTER] soft key to store the time offset.
7. Press the CLEAR key to return to radio operation.
7.8.2 Changing the Time Area
This menu selection allows the radio to show UTC time or local time with offset.
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "SETUP", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "GPS SETUP",
then press the [SELECT] soft key.
GX6000E
c
c
c
c
Page 31