Navigation; Waypoint Operation - Standard Horizon QUANTUM AIS GX6000E Owner's Manual

11 NAVIGATION

The GX6000E is capable of storing up to 250 waypoints for navigation using
the compass page.
You can also navigate to DSC distress calls with position or a position received
from another DSC radio using DSC polling.
11.1

WAYPOINT OPERATION

11.1.1 Starting and Stopping Navigation
Navigation by Using the Waypoint Directory
[ ]  "NAVI"  "WAYPOINT"
1.
2. Rotate the DIAL/ENT knob to select the desired
category ("HISTORY" or "MEMORY"), then press the
[SELECT] soft key.
3. Rotate the DIAL/ENT knob to select a waypoint, then
press the [SELECT] soft key. The navigation screen
will appear.
The screen includes the distance and direction to the
destination, and the waypoint is indicated by a dot ()
inside the compass.
4. Press one of the soft keys to show the key selections.
Press the [STOP] soft key to stop the navigation.
Navigation by Manually Entering a Waypoint
[ ]  "NAVI"  "WAYPOINT"
1.
2. Rotate the DIAL/ENT knob to select "MANUAL", then
press the [SELECT] soft key.
3. If you want to give the waypoint an easy-to-find name,
rotate the DIAL/ENT knob to select "NAME:", press
the [SELECT] soft key, then enter the name. For
details, refer to "10.4.1 Setting up the Individual /
Position Call Directory".
GX6000E Page 87