Add New Serial Number - Honeywell Posi 3 Setup Manual

10. Double click on the Facepiece from the
Available column so that it appears in the
column at right. Then click "Next".
11. At the Alarms Selection screen, double
click on the appropriate Alarm from the
Available column so that the alarm
appears in the column at right and click
"Next".
12. At the Gauge Selection screen, double
click on the appropriate gauge from the
Available column so that the gauge
appears in the column at left and click
"Finish".
Once the model has been configured, the
software will return to the Choose Model
screen and the new model will be shown in
the box at left. When selected, the
components of that model will be shown in
the box at right.
13. Click OK when finished adding models.

6.5 Add New Serial Number

Prior to assigning a serial number to an
apparatus, the apparatus model information
must be added to the models database.
1. To add a new serial number to the
software, first select Setup / Apparatus /
Add New Serial Number.
The Choose Model Screen will be shown.
The default settings for the Choose Model
screen are to display Active Breathing
Apparatus. Options at the bottom allow that
user to select from Breathing Apparatus or
Cylinders and from Active, Inactive or All.
Inactive items cannot be selected for testing.
To change the active / inactive setting for an
item, right click on it and select "Set as
Active" or "Set as Inactive" (as appropriate)
from the menu options.
22