Attach The First Stage Manifold - Honeywell Posi 3 Setup Manual

other than a cylinder is used, make sure
the supply regulator is set to the
appropriate pressure.
service SCBA without the proper training
from the SCBA's manufacturer.
4. Connect the handwheel on the open side
of the T-fitting to the air source. Make
sure the handwheel is tight and that any
valve used for the pressure supply is
located next to the T-fitting on the
manifold.
manifold does not kink! Kinking can
cause the hose to rupture, which can lead
to serious injury, or death.
If a pressure supply
Do not attempt to
Make sure the
5. Connect the SCBA to the T-fitting on the
manifold.

7.4 Attach the first stage manifold

An adapter is required to connect the first
stage manifold to the breathing apparatus.
First stage manifold adapters are specific to
the SCBA and are only available from the
SCBA manufacturer.
breathing apparatus manufacturer's
instructions when connecting the first
stage to the Posi 3 USB.
Note: Detailed connection instructions
for a variety of models are available in the
help files for the various brand-specific
Posi 3 USB software versions.
You are now ready to begin testing your
breathing apparatus. Refer to the help file for
further instructions. The help file can be
launched from the software at any time by
using the F1 key.
26
Always follow the