Honeywell Posi 3 Setup Manual page 16

Enter the password that was entered for the
cluster Superuser in the advanced
installation. For those who performed the
basic installation, the password is
"biosystems".
Click OK. The server information screen will
then be shown.
From the Tools Menu select Server
Configuration / postgresql.conf to access the
PostgreSQL backend configuration settings.
The "Backend Configuration Editor" screen
will be shown.
In the "Backend Configuration Editor",
double-click on "listen_addresses" to access
the configuration settings for listen
addresses.
Click on the "Enabled" box. The default entry
for the Value input box is "localhost". To limit
the database access to the host PC, the
setting should be "localhost".
To grant client access to clients that are NOT
on this PC, the value should be changed to
an asterisk ("*"). The asterisk setting allows
the PC that is creating the database to
continue to access the database along with
the listen addresses that will be specified in
the Client Access Configuration screen.
Click OK and return to the main pgAdmin III
screen.
The "Backend Access Configuration" must
also be changed for other clients to have
access.
15