Add New Serial Number - Honeywell TESTAIR 4 Setup Manual

11. At the Alarms Selection screen, double click on the
appropriate Alarm from the Available column so
that the alarm appears in the column at right and
click "Next".
12. At the Gauge Selection screen, double click on the
appropriate gauge from the Available column so
that the gauge appears in the column at right and
click "Finish".
Once the model has been configured, the software will
return to the Choose Model screen and the new model
will be shown in the box at left. When selected, the
components of that model will be shown in the box at
right.
13. Click OK when finished adding models.

6.5 Add New Serial Number

Prior to assigning a serial number to an apparatus, the
apparatus model information must be added to the
models database.
1. To add a new serial number to the software, first
select Setup / Apparatus / Add New Serial
Number.
The Choose Model Screen will be shown.
The default settings for the Choose Model screen are
to display Active Breathing Apparatus. Options at the
bottom allow that user to select from Breathing
Apparatus or Cylinders and from Active, Inactive or All.
Inactive items cannot be selected for testing. To
change the active / inactive setting for an item, right
click on it and select "Set as Active" or "Set as
Inactive" (as appropriate) from the menu options.
2. If the model for the serial number to be entered is
shown, click on it to select it and click OK.
To add a new model, click the "New" button and refer
to section 6.4 for instructions on adding a new model.
EN-9