Postgre Client Access Settings - Honeywell Posi 3 Setup Manual

Select Admin81 only and click "Next".
Click "Next" to proceed with the installation.
If Antispyware is installed on the PC, the
following notice may be shown. Please
disregard this notice.
Once the installation is complete, click
"Finish" to return to the Database Installation
Wizard.

Postgre Client Access Settings

The database server's client access settings
control access to the database when it is
located on a network with multiple users.
PostgreSQL's client access settings must be
configured prior to use. This is done
automatically in the basic server installation,
but must be done manually when the
advanced server installation is used.
The client access setting can be changed at
any time by following this procedure.
The PostgreSQL database is configured
through the pgAdmin III application located at
Programs / PostgreSQL 8.1 / pgAdmin III.
Once the application launches, the following
screen will be shown.
In the left pane under the Server List, double
click on "PostgreSQL Database Server 8.1".
14