Advertisement
BUSINESS..1
entries have already been stored, delete the least important entries before adding new
ones.
4. Termination
This terminates program execution. A prompt indicating the termination is displayed,
and the FP-200 waits for a BASIC command.
It is advisable for the number of entries per day not to exceed 20. If there are more
than 20 entries for a particular day, change the figure (20) in the array declaration in
line 250 of the program to an appropriate figure. Also, if there are more than 80 entries
to be stored, change the figure (80) in the array declaration of line 140 and in the FOR
~
NEXT loop in lines 150, 180, 260, and 430, respectively, to an appropriate figure,
and at the same time, change the figure (79) in lines 200 and 220 to the newly assigned
figure minus 1. By doing so, the number of entries that can be handled can be in-
creased, although the memory requirement increases accordingly. When either the
figure 20 or 80 or both are changed to other figures as described above, re-input all
entries using the new entry command.
Example of output
DATE
11/16
TIME
10: 30
SCHEDULE
MEETING •.
DATE
11/24
TIME
18: 40
SCHEDULE
PARTY
DATE
TIME
11/30
SCHEDULE
DATE
1
7: IZH2!
DATE
TIME
12/05
19:00
SCHEDULE
BIRTHDAY
Advertisement
