Expand Vendor Parameters in the Property Panel.
3.
In the Modbus Interface list, click the required option. The following are the interface
4.
options available.
•
Modbus RTU
•
Modbus TCP
Based on the connected Modbus devices, select the appropriate
option.
ATTENTION
Configure one of the following depending on the Modbus interface option that you
5.
have selected.
•
If you have selected Modbus TCP Interface, configure the following under
Modbus TCP Settings.
FEWIO IP Addr: IP address that needs to be assigned to FEWIO and the IP
▪
address Subnet should be same as the IP address of slaves
Subnet Mask: Subnet Mask
▪
OWDOC-X256-en-323A
FIELD EXPANDABLE WIRELESS IO
56