Honeywell Field Device Access Point User Manual page 39

The following table describes the FDAP parameter details.
Panel
Access Point Summary
OWDOC-X256-en-323A
FDAP parameters in the selection panel
Table. 10.
Group elements
Identification
ISA100 Network
Address
ISA100 Time
Synchronization
Description
Tag Name: Displays the default device name.
You can rename the device. Device name
can be up to 16 alphanumeric characters
long and it should begin with an alphabet.
Status: Displays the device status as Joined
or Offline.
Default Map: You can select the required
map on which the device must be placed.
Description: Displays the entered
description for the device. You can type the
required description for the device.
Displays the identification details like
Vendor, Model (device type), Serial Number
(EU ID of the device), Radio Revision
(firmware revision number), Template Type,
and Template Revision.
Displays the network address details like
IPv6 Address (128-bit network address),
EUI64 (unique ID), Short Address (16-bit
number assigned by system manager), and
the Routing Level.
NOTE:
When you move the mouse pointer over
the partially visible data on the Property
Panel, the complete data is visible.
Displays the tag name and the 16–bit
address of the time master of the device,
and the time distribution level.
39