Honeywell Field Device Access Point User Manual page 46

Onewireless
Table of Contents

Advertisement

Radio Diversity
Location
NOTE:
Location Options are only applicable to FDAP
Gen3 Anchor.
OWDOC-X256-en-323A
Error Distribution
Displays the error distribution counter, which
Count
corresponds to the error packet counter for
the number of bytes corrected. The error
packet counter is the total count of error
packets
received on both antennas with the Cyclic
Redundancy Check (CRC) error.
Statistics
Diversity Operation: Displays the FDAP or
FDAP Gen3 antenna operational status. The
status can be Both Radios, Radio 1 or
Radio 2.
Correction Gain: Displays the correction
gain, which is the total packet corrected by
packet error correction algorithm.
Redundancy Gain: Displays the redundancy
gain, which is the minimum value of total
packets received by antenna 1 without any
packet errors + minimum value of total
packets received by antenna 2 without any
packet errors / total packets received by
antenna 1 and 2 without any packet errors.
Reset Statistics: Resets all the radio diversity
values. Click to reset all the radio diversity
values.
Ranging Technique: Displays the Ranging
technique used between Tag and FDAP Gen
3 Anchor. The following are the Ranging
Techniques.
Hybrid Techniques – Starts with One way
Ranging, during retry it switches to Two way
Ranging.
Distance Offset: Displays the minimum
expected distance between tag and FDAP
Gen 3 Anchor.
FDAP CONFIGURATION
One way Ranging
Two way Ranging
Hybrid Ranging
46

Advertisement

Table of Contents
loading

This manual is also suitable for:

Field device access point gen3Field device access point gen3 anchorFdap2Fdap2 gen3Fdap2 gen3 anchor

Table of Contents