Table of Contents
Advertisement
FDAP2
The FDAP2 has status LEDs to indicate the various stages of operation.
The following table identifies the LEDs and describes the operating conditions of the unit
when the LEDs are turned ON.
LED
Description
Indicates the RS-485 port's activity.
RS-485 status
The LED blinks when there is data activity on the RS-485 port.
(Green)
Fig. 19.
LED
Description
Power LED (Green)
Indicates that the power is supplied to FDAP2. When the FDAP2 is
powered ON, the Power LED turns ON automatically.
Status
Indicates the software status of FDAP2 factory image. The Status LED
LED/Heartbeat LED
blinks ON/OFF once every second to indicate that the FDAP2 factory
(Green)
firmware is in the working condition.
Comm LED (Green)
Indicates the Ethernet link activity.
The LED is steady when there is a valid Ethernet link but no data
activity.
The LED blinks when there is data activity on the Ethernet link.
OWDOC-X256-en-323A
LED indicators
LED indicators
Table. 9.
FDAP INSTALLATION
36
Advertisement
Table of Contents
