Honeywell Field Device Access Point User Manual page 24

Pole mounting
When pole mounting the FDAP Gen3 and FDAP Gen3 Anchor, you can assemble and
install the mounting hardware at the site. The mounting kit includes the following items:
The pole mounting kit comprises of mounting plate, U-bolts with nuts, screws and washers
as displayed in the following figures. When using the mounting plate for the pole
installation, secure the FDAP Gen3 and FDAP Gen3 Anchor to the bracket using the
screws supplied with the bracket kit. The FDAP Gen3 and FDAP Gen3 Anchor can be
mounted to the left or to the right of the pole using the same mounting hardware. It can
also be mounted in line with the pole. However, if the integral antennas are too close to the
pole, it may cause RF communication problem. For inline mounting, the FDAP Gen3 and
FDAP Gen3 Anchor integral antennas should be on the top of the mounting pole.
Pole mounting bracket assembling on FDAP Gen3 and FDAP Gen3 Anchor
Fig. 9.
Mounting plate
1.
U-bolts with nuts
2.
Screws (to attach the FDAP Gen3 and FDAP Gen3 Anchor to the mounting plate)
3.
Washers (split lock washer, flat lock washer, lock washer)
4.
OWDOC-X256-en-323A
FDAP INSTALLATION
24