Honeywell Field Device Access Point User Manual page 54

FIELD EXPANDABLE WIRELESS IO
The Jumper is used to switch the connection between RS-485 and Ethernet. When the
Jumper is placed in its relevant position as shown in the following figure, the connection
towards RS-485 is terminated and Ethernet is configured. The removal of Jumper enables
RS-485 connection and terminates Ethernet configuration effectively.
FDAP Gen3 Jumper connection
Fig. 26.
FDAP Gen3 Anchor Jumper connection
Fig. 27.
OWDOC-X256-en-323A 54