Honeywell Field Device Access Point User Manual page 41

OWDOC-X256-en-323A
Command Consists of the Join Command parameter
which is used to restart a device or to reset a
device to factory default state. Join
Command parameter has the following
options:
•
•
•
Uptime and Displays the uptime and connectivity details,
Connectivity which are as follows:
•
•
•
•
ATTENTION
When a device is reset to default through a
Provisioning Handheld device, the Restart
Count and Device Drop-off Count are reset
to 0.
None
Warm Restart: To restart a device.
Warm Restart preserves static and
constant attributes data
Restart as Provisioned: To reset the
device to factory default state.
Restart as Provisioned corresponds
to the provisioned state of the device
in which the device only retains the
data received during its provisioning
Uptime: Time (in seconds) during
which the device is online
Restart Count: Number of times the
device is restarted. The Restart
Count begins from one when it is
reset to default
Device Drop Off Count: Number of
times the device is disconnected
from the network
Reset Statistics: Resets only the
Device Drop-off Count. Click to reset
the Device Drop Off Count
41