Honeywell Field Device Access Point User Manual page 40

Device Management
OWDOC-X256-en-323A
Power Displays the power supply status as Line
Powered (for access points) or Battery
Powered (for routing devices). By default,
power status is always Line Powered.
Routing Displays the routing configuration of the
Assignment device. The different types of configuration
are Non-Routing Device, Routing Device,
and Not Applicable. By default, Routing
Assignment is not applicable for FDAP and it
should not be changed.
Role Capability Displays the capable roles of a device. By
default, FDAP can be an access point device,
if you enable over-the-air provisioning then
it can act as a provisioning device.
The different roles that can be configured
are Provisioning Handheld device, System
Time Source, Security Manager, System
Manager, Gateway, Access Point, Routing
Device, and I/O Device. If the Ethernet is
plugged, it acts as an access point and if the
Ethernet is unplugged, it acts as a routing
device.
Assigned Role Displays the current assigned role of the
device.
FDAP CONFIGURATION
40