FDAP2
The FDAP2 router Ethernet cable should be connected to the Modbus Slave Ethernet port
as shown in the following figure.
The FDAP router Ethernet cable should be connected through a Cisco Switch, if you have
multiple TCP Modbus slaves as shown in the following figure.
Modbus Slave
FDAP2 Connecting Modbus
Fig. 22.
Modbus Slave 2
Modbus Slave 1
Modbus Slave 0
FDAP with Cisco Switch- Multiple Modbus
Fig. 23.
OWDOC-X256-en-323A
FIELD EXPANDABLE WIRELESS IO
+
+
CAT5E feed
568B
52