Table of Contents
Advertisement
IntelliKnight 5820XL Installation Manual
4.10 Configuring Modules
This section describes how to configure any system hardware modules that have been added
to the system.
4.10.1 Assigning Module IDs
When installing a hardware module (such as, 5815XL, 5824, 5860, 5895XL, 5865-3 or 5865-
4), you must use the dipswitches on the module to assign an ID# to the module.
Figure 4-28 shows all possible dipswitch positions and their correlation to a numerical ID. For
example, to select ID 2, place dipswitch 2 in the up position.
Refer to Section 7.2 to edit, add, delete, and view module list.
4-28
Figure 4-28 Possible module addresses
firealarmresources.com
151209
Advertisement
Table of Contents
Troubleshooting
